6 of 18
1.2 Technical Data
1.2.1 Specification – Type 4511-W-006 – Monoaxial
General Characteristics
Accelerometer Type IEPE – monoaxial
Voltage Sensitivity (at 159.2 Hz) 10 mV/g
Sensitivity Tolerance ±5% on the whole frequency range
Measuring Range ± 500 g pk
Output Full Scale Voltage ±5 V
Frequency Response ±5% from 2 Hz to 25 kHz
Resonance Frequency 43 kHz
Precision (Residual Noise):
10 Hz
100 Hz
1 kHz
0.01 g max
1.6e-3 Hzms
2
5.0e-4 Hzms
2
1.6e-4 Hzms
2
Linearity ±1%
Transverse Sensitivity 5% max.
Temperature Response –10% +15% max. from –51°C to +150°C (referring to sensitivity at
20°C)
Measurement Axis Perpendicular to the mounting surface
Protection Against Crossed polarity and short circuit
Electrical Characteristics
Output Impedance 2 Ω max
DC Output Bias Voltage 12 Vdc ±1 Vdc at room temperature and 4 mA
12 Vdc +1 –2 for whole temperature and current range
Supply Current +2 mA (min.) to +10 mA (max.)
Supply Voltage +23 Vdc to +32 Vdc
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
