8 of 18
1.2.2 Specification – Type 4524-W-001 - Triaxial
General Characteristics
Accelerometer Type IEPE – triaxial
Voltage Sensitivity (at 159.2 Hz) 100 mV/g
Sensitivity Tolerance ±5% on the whole frequency range
Measuring Range ±50 g pk
Output Full Scale Voltage ±5 V
Amplitude Response ±5% from 2 Hz to 2 kHz
Phase Response ±5° from 2 Hz to 2 kHz
Resonance Frequency >18 kHz
Precision (Residual Noise) 0.3 g max.
Linearity ±1%
Transverse Sensitivity 5% max
Temperature Response ±10% max from – 45°C to +125°C
(referring to sensitivity at 20°C)
Measuring Axes z-axis perpendicular to the mounting surface
x-,y-,z- right-hand coordinates
Protection Against Crossed polarity and short circuit
Electrical Characteristics
Output Impedance 2 Ω max.
DC Output Bias Voltage 12 Vdc ± 1 Vdc for whole temperature range
Supply Current +2 mA (min.) to +10 mA (max.)
Supply Voltage +23 Vdc to +32 Vdc
Insulation Resistance >100 MΩ
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
