BRUEL & KJAER 4812 - 2. Installation; 2.1. Mechanical Installation of Exciters Using Type 4801 Body

spension arrangement which provides isolation at most frequencies and has the facility of
full 360
0
positioning . The 4801 S is a simplified base upon which the Exciter is fixed in
one position . Uniess otherwise stated, in this book the 4801 T is the Body referred to.
For
same applications, it could be preferable to use a Permanent Magnet Exciter Body
4805. It has the advantage of quieter operation since it can be operated without cooling,
but the disadvantage of reduced force rating . Use of the permanent magnet bodies re-
duces the power available to 70% of that available with the 4801.
6