MATRON-Light with 2250-M Field Guide, Page 29
9.2 Transferring results using the USB connection from 2250 into the
computer.
9.2.1 Ensure the software protection key (sometimes referred to as the “dongle” or “hasp” key) is
present on the printer port or USB port of your computer. You will need the key present
whilst transferring the results from BZ5503 software to 7815 or 7820 but it does not need to
be present after this process.
9.2.2 Start the 2250-M Utility software program Type BZ5503.
9.2.3 Connect your 2250-M (switched on or off) to your computer using cable Type AO1476
(mini USB at 2250-M to USB port at computer).
9.2.4 If not already running, switch on your 2250-M.
The software will detect your 2250-M and show the instrument serial number and current
user:
If this has not happened, click on .
9.2.5 Highlight the set of results you wish to transfer (
in this example).
9.2.6 Right-click to reveal a drop-down list and click on
.
9.2.7 Select the Archive where you want your results stored (or create a
one if you wish):
To Next Page
Loading...
