BRUEL & KJAER Mediator 2238 - Introduction to Measurement Setup; Measurement Set-up Menu Navigation; Setting Frequency Weightings

Chapter 3 – Measurement Set-up Menu
Measurement Set-up Menu
3–2
Brüel & Kjær2238 Mediator
User Manual
3.1 Measurement Set-up Menu
3.1.1 Introduction
This chapter explains how to set up measurement parameters
that are specific for the Enhanced module.
3.1.2 Measurement Set-up Menu
Enhanced SLM Software BZ7125 contains the menu items
shown in Fig. 3.1.
3.1.3 Setting Frequency Weightings
The Weightings Window is used for setting up frequency
weightings for detector 1 and 2, see Fig. 3.2.
It is not required to set the time weighting (F, S, I) in the
Enhanced module since they are always measured simulta-
neously.
Fig.3.1 The Measurement Set-up menu (two windows)
Fig.3.2 The Weightings Window