Chapter 4 – Measuring
Setting a Measurement to Start Automatically
BB1122–11
4–3
2238 Mediator
User Manual
month ahead) using a specified set-up. See also section 3.1.5
in the Basic User Manual.
From a specific software module, in this case Enhanced SLM
Software BZ7125, all four Auto Starts can be seen and se-
lected, but you can only set up an Auto Start for the currently
running application module. If you want other application
modules to start, the Auto Start must be set from that mod-
ule.
To set up an Auto Start:
1. Select Auto Start from the Measurement Set-up menu.
If no Auto Start is set up, for example for Auto Start no.
1, the display appears as:
2. Use the cursor keys to select one of the four Auto
Starts and press <Ok>.
If the Auto Start is active, the display will show the
associated application module as well as the set-up
number and the start time.
Fig.4.2 The basic Auto Start Window
Fig.4.3 Auto Start set-up
To Next Page
Loading...
