BRUEL & KJAER Mediator 2238 - Saved Data File Structure; Set-up Data Details

Chapter 5 – Data Handling
Print Options
5–2
Brüel & Kjær2238 Mediator
User Manual
5.1 Print Options
Before you print a file or the current measurement, you
should select which measurement parameters you want to
print out in the Print Options list.
5.1.1 Saved Data
A basic measurement data file consists of a group of set-up
data, a group of associated measurement data and statistics
data. The set-up data are:
● Serial number for Mediator
● Measurement set-up
● Calibration data
● Measurement data
Measurement data are:
● Overall results
● RMS Broadband data for Detector 1 and 2
● Broadband Peak data for Detector 2
Statistics data are:
● Level distribution
● Cumulative distribution
5.1.2 Set-up Data
Measurement Set-up
All measurement set-up parameters that were used for the
measurement.
Calibration Set-up
● Microphone type