Chapter 8 – Interface
Controlling Mediator via the Serial Interface
BB1122–11
8–3
2238 Mediator
User Manual
Peak weighting can be C or L. The frequency weighting values
for RMS are: A, C or L.
Note: Some combinations of weightings are mutually exclu-
sive for the two detectors.
The syntax for the query Frequency_Weighting_2? and the
response returned by Mediator appears in Fig. 8.2.
Example (setting frequency weighting for Detector 2 to RMS
and A-weighting):
Interface job from controller:
Frequency_Weighting_2 Rms_A
Fig.8.1 Syntax for Frequency_Weighting_2 command
Fig.8.2 Syntax for the Frequency_Weighting_2? query and Mediator re-
sponse
PEAK_C
PEAK_L
RMS_A
RMS_C
RMS_L
980220e
FREQUENCY_WEIGHTING_2?
From Mediator
Te
::
980150e
Te
From Mediator
:
Te
:
To Mediator
Wgt. Value
Char
FREQUENCY_WEIGHTING_2?
SP
–
FREQUENCY_WEIGHTING_2?
To Next Page
Loading...
