145
Appendix C
Discontinued Hardware
C.1 DSP-based Hardware
From version 9, PULSE does not support DSP-based hardware, specifically the following
types:
Multichannel Data Acquisition Unit Types 2816 and Data Acquisition Unit Type 2825 including:
• DSP Boards ZD-0812 and ZD-0828
• TAXI Interface Module ZD-0815
• Throughput-to-disk Option with Hard Disk UL-0112
• Signal Analyzer Interface Module Type 7521
• 25 kHz Input Module Type 3015
• 100 kHz Input Module Type 3016
• Sound Intensity Module Type 3017
• 4-channel Input Module Type 3022
• 4-channel Microphone Input Module Type 3028
• Generator Module Type 3107
• Signal Output Module Type 5955
C.2 IDA Modules
C.2.1 6-ch. A & V Recording Module Type 3030
Type 3030 is a discontinued module originally used in Intelligent Data Acquisition System
Type 3561. The module, which has specifications similar to those of Type 3032-B, can be
used in PULSE systems though with certain limitations:
• Maximum sample rate is 32 kHz, corresponding to 12.8 kHz bandwidth
• No generator output
• No Charge Injection Calibration
• No microphone polarization voltage
To Next Page
Loading...
