CHAPTER 3
Start-up and Testing
39
Fig.3.2
One Controller module
and one Input module
Fig.3.3
Multiple modules in a
multi-frame setup
6) Click Start.
7) If you have not checked I
nternal cabling, connect cables as the program indicates.
This will test your system all the way from the input/output connections to the Win-
dows
®
application.
The program will advise you when the specific module has passed or failed an analog
self-test (Fig.3.4). View the test Log to read any failure messages and, if desired, select
File, Save or Save as to save the Log in rich text format. Click Help for more information.
When all present modules have passed the test, you should have a working system
ready for measuring.
To Next Page
Loading...
