© Brüel & Kjaer Vibro ● S1079330.002 / V04 ● █ Page 187 of 188
Technical alterations reserved!
Brüel & Kjaer Vibro │ Instruction
VC-8000 MPS
Content
EN
26 Appendices
26.1 Environmental Information
After use, dispose of the systems, cables and sensors in an environmentally friendly
manner, in accordance with the applicable national provisions. WEEE Reg. No. DE
69572330
NOTE!
The VC-8000 SAM module includes a small lithium battery.
Please follow proper disposal practices.
26.2 File Extensions
Table 26-1 lists the file extensions used by the VC-8000 system.
File Extension Description
.set
MPS Configuration + diagnostic in a single file type but can be opened by either
Maintenance or Setup software.
If you open a file containing only configuration information, the maintenance
software will indicate that no diagnostic information is available, such as when
creating a configuration on your laptop before connecting to a physical rack – or a
legacy configuration file where diagnostic information was not saved.
VC-8000 Key (License upgrade, or password reset)
.cms
Condition Monitoring Software
A single file containing CMS-formatted data. Can span no more than 7 days.
Note: Currently a .cms file displays time according to the time zone of the
computer viewing the file.
.cmssd
Used with CMS-SD, CMS-HD, and CMS-XC to point to directory containing
unformatted CMS data. Individual unformatted files use a variety of extensions
and cannot be opened and read by CMS Display directly. They are meant to be
opened as groups of files via the .cmssd extension. Unlike 7-day limit on .cms
files, .cmssd has no limit on number of days spanned.
.met
Old configuration file. This format is no longer used. Please update your MPS
software to the latest version.
Table 26-1) Software File Extensions
To Next Page
Loading...