Page 26 of 188
█ © Brüel & Kjaer Vibro ● S1079330.002 / V04
Technical alterations reserved
EN
2.6 Related Documents
2.6.1 Instruction Manuals
The following manuals contain instructions for specific machines and/or applications. These manuals
can be found at the B&K Vibro website.
Document
Title
S1079330
VC-8000 Operation & Maintenance Manual (this document).
S1342998
Reciprocating Machines Applications Manual
S00002001
Rolling Element Bearing Applications Manual
S1160865
Hazardous Installation Applications Manual
S1354794
MPS Functional Safety Assessment Manual
S1140127
VC-8000/WPH & VC-8000/PSH Weatherproof Housings Manual
S1176125
SETPOINT Condition Monitoring System Operation Manual
2.6.2 Specifications
The following specifications and ordering information can be found at the B&K Vibro website.
S1077785
S1078950
Rack Connection Module (RCM) and External Power Supplies
S1077786
System Access Module (SAM)
S1077787
Universal Monitoring Module (UMM)
S1077788
Temperature Monitoring Module (TMM)
S1490124
Setup & Maintenance Software
S1078951
VC-8000/WPH & VC-8000/PSH Weatherproof Housings
S1157533
SETPOINT Condition Monitoring Software
S1095333
Signal Simulator Interface
2.6.3 Drawings
The following drawings and installation aids can be found at the B&K Vibro website.
1089867
Outline, Panel Cutouts, Dimensions, and Wiring
1109209
Panel Cutout Dimensions for Remote Display Panel
100473
Secondary Buffered Output Cable (Don’t use) (See 9.4.2)
2.6.4 Application Notes
The following application notes can be found at the B&K Vibro website.
S1466106
Using Buffered Outputs and Patch Panels
S1224323
Understanding Waveforms and I-Factor
S1365855
VC- 8000 and API 670 5th Edition
S000018
Understanding Boost Mode Data Collection
N/A
Integration of SETPOINT into OSIsoft PI Eco System
S13311
Cybersecurity Considerations for Vibration Monitoring Systems
To Next Page
Loading...