© Brüel & Kjaer Vibro ● S1079330.002 / V04 ● █ Page 3 of 188
Technical alterations reserved!
Brüel & Kjaer Vibro │ Instruction
VC-8000 MPS
Content
EN
Content
1 VC-8000 Machinery Protection System 16
1.1 Rack Chassis 17
1.2 Four Basic Cards for the VC-8000 18
1.2.1 Rack Connection Module (RCM) 19
1.2.2 System Access Module (eSAM or bSAM) 20
1.2.3 Universal Monitoring Module (UMM) 21
1.2.4 Temperature Monitoring Module (TMM) 22
1.3 Touch Screen Display Panel 23
1.3.1 Buffered Output BNC Connectors 23
1.4 Rack Setup and Maintenance Software 23
2 Safety Information 24
2.1 Intended use 24
2.2 Sources of Danger 24
2.2.1 Supply Voltage 24
2.2.2 Relay/Trip Voltage 24
2.3 User Qualification 25
2.4 Regular Maintenance Schedules 25
2.4.1 Firmware Updates 25
2.5 Pictograms 25
2.6 Related Documents 26
2.6.1 Instruction Manuals 26
2.6.2 Specifications 26
2.6.3 Drawings 26
2.6.4 Application Notes 26
3 Engineering - Choosing a Mounting Method 27
3.1 Helpful Tips for Rack Installation 27
3.2 Bulkhead Mounting 28
3.3 Panel Mounting 29
3.3.1 VC-4000, VC-6000, or BN 3300 Replacement (Wire from Rear) 29
3.4 19” EIA Rack Mounting (rare) 30
3.5 Weather Proof Enclosure Mounting 30
3.6 Mounting Hole Drawings 31
3.7 Other Considerations 31
3.7.1 Mounting the Display Remotely 31
To Next Page
Loading...