BRUEL & KJAER VIBROCONTROL 8000 - 10.3.6 Grid Filter

© Brüel & Kjaer Vibro ● S1079330.002 / V04 ● █ Page 73 of 188
Technical alterations reserved!
Brüel & Kjaer Vibro │ Instruction
VC-8000 MPS
Content
EN
10.3.6 Grid Filter
Use the filter to show only the rows you are interested in seeing. The filter is not case sensitive and
applies to all column headers (marked with an asterisk) simultaneously. When the filter is active the
filter control has a bold border. Click on the “x” to clear the filter.
Figure 10-8) Grid Filter
Filter Examples Filter will show
(1) Phase Trigger” or “Phase”
Only the Phase Trigger channel
(2) “Axial”
Two Axial channels
(3) “Motor”
Five “Motor” rows
(4) “Brg 4”
Two “Brg 4” rows
Table 10-3) Filtering the grid, examples