Translation of the Original Operating Instructions
VP-80/VP-80 E
95
STORE
When you press this softkey the current measurement is sa-
ved as a report and can be called up again later.
EXIT
The measurement is rejected, not saved and you are returned
to the Overalls mask.
CANCEL
You are taken back to the last measurement. The last measu-
ring data can then be displayed.
8.8 Save measurement
You have the option of saving measurements. This means
that you can call up measurements which you have adapted
in the module setup and in the measurement overview at any
time. In addition to the measuring result, the setup which is
linked to the measurement is also saved.
End the measurement with the STOP softkey.
Press the STORE softkey.
The following mask opens:
To Next Page
Loading...
