BRUEL & KJAER VIBROPORT 80 - Overalls

Translation of the Original Operating Instructions
VP-80/VP-80 E
101
9.3 Overalls
Parameter
Setting para-
meter
Explanation of the
parameter
Input chan-
nels
CH1(&CH2&CH
3&CH4)
Definition of the num-
ber of input channels.
Sensor
B&K Vibro sen-
sors; Process;
Variable
Sensor type
Selection in
“Sensor”
B&K Vibro sen-
sors e.g. ASx-
06x/…
N/A
Sensor units
e.g. g Sensor unit
Sensitivity
e.g. 100 (mV/
Sensor Units)
Sensitivity per sensor
unit.
CCS Power On; Off
Constant Current Sup-
ply. Depending on
selection in “Sensor”.
Variable Variable N/A
Sensor Units N/A See above
Sensitivity N/A See above
CCS Power N/A See above
Process Process N/A
Sensor Units N/A See above
Sensitivity N/A See above
Offset N/A (mV)
Sensor offset: The off-
set is calculated accor-
ding to the following
formula:
Signal_Off = Signal-
offset