Translation of the Original Operating Instructions
VP-80/VP-80 E
6
WARNING!
Electricity!
Live components in the VIBROPORT 80 are hazardous
areas. These include: various soldered points, printed con-
ductors, mains connection terminals, relay contacts, etc..
Contact with these areas will result in personal injuries, as
well as damage to the VIBROPORT 80.
• Do not open the device.
• Switch off the mains voltage before opening the battery
compartment or the SD storage card slot.
• Avoid coming into contact with live components.
Note!
Only expose the VIBROPORT 80 to permissible ambient
influences (temperature, air humidity, vibrations).
Non-observance can cause faults and damage to the
VIBROPORT 80.
Note!
Only use genuine spare parts in the VIBROPORT 80.
Note!
The VIBROPORT 80 is not designed for long-term use under
UV light.
Note!
Before commissioning, test the local mains voltage check
and compare it with the voltage range of the AC-7001 power
supply module. The AC-7001 Operating Instructions are
included in the scope of supply. If the mains voltage is diffe-
rent, this can cause damage to the power supply module and/
or to the VIBROPORT 80.
To Next Page
Loading...
