BRUEL & KJAER VIBROPORT 80 - 2.4 Maintenance and Repair

Translation of the Original Operating Instructions
VP-80/VP-80 E
7
2.2 Handling vibration measuring and monitoring instruments
The following safety advice must be adhered to when hand-
ling our products, in order to protect against risk of injury.
For your own safety you must have read and understood the
pertinent safety advice before working with the
VIBROPORT 80.
Keep the safety advice in a safe place, where it can be ac-
cessed by all persons who work with the VIBROPORT 80.
2.3 Qualification of the operating authority
Inadequate qualification can result in incorrect settings being
made on the VIBROPORT 80, which can have far-reaching
consequences, e.g. machine damage, personal injuries.
Only competent, expert and authorized personnel are permit-
ted to carry out work in connection with our products.
2.4 Maintenance and repair
Repairs may only be carried out by trained personnel from the
company’s headquarters or an authorized Brüel & Kjær Vibro
GmbH service station. Only simple activities such as changing
batteries, cleaning, testing connections, etc. can be perfor-
med by the user.
i
Note!
The battery connections must not be short-circuited! This will
cause damage to the battery / the VIBROPORT 80.
i
Note!
Use a slightly damp cloth for cleaning.
i
Note!
The seals of the battery compartment, the SD storage card
slot and the housing of the VIBROPORT 80 must be regularly
checked to ensure the integrity of the water and dust protec-
tion.