Translation of the Original Operating Instructions
VP-80/VP-80 E
9
2.7 Low Voltage Directive
The VIBROPORT 80 fulfils the relevant requirements of Low
Voltage Directive 2006 / 95 / EC in accordance with EN
61010:2010.
2.8 IP protection
Note!
Electromagnetic interference can influence the measured
values and should be avoided as far as possible.
Note!
Protect unused sockets with the AC-7301 protective caps
provided. These will protect the sockets of the
VIBROPORT 80 from water or dust.
Note!
Insert the seal and the cover of the SD storage card slot (AC-
7310 / VP-80 E or AC-7311 / VP-80) correctly. This will pro-
tect the SD storage card slot from water, dust and other
external influences.
To Next Page
Loading...
