Translation of the Original Operating Instructions
VP-80/VP-80 E
12
3.3 Safety advice
WARNING!
Explosive atmosphere!
Do not use channel CH R in a potentially explosive atmos-
phere.
This can result in explosions, personal injuries and damage to
the VIBROPORT 80 due to sparking.
• Do not use channel CH R for measuring in these areas.
• The input socket must be covered with the protective cap
provided.
• Pins EXT TRIG AUX and +5V-EXT of channel USB DEV /
TRIG / PWR can be used for connecting to the explosion-
proof VIBROPORT 80 E.
• Only sensor PA-98 provided for this purpose can be con-
nected to channel USB DEV / TRIG / PWR.
• Sensors and cables may only be connected outside the Ex
zone.
WARNING!
Explosive atmosphere!
All unused connections (input sockets) must be covered with
protective caps when using the VIBROPORT 80 E in a poten-
tially explosive atmosphere. Connections without protective
caps can cause explosions, resulting in damage to property
and injuries.
• Cover all unused connections on the VIBROPORT 80 with
the AC-7301 protective caps.
• The AC-7301 protective caps may only be fitted and remo-
ved outside the Ex zone.
To Next Page
Loading...
