Translation of the Original Operating Instructions
VP-80/VP-80 E
18
5 Technical Data
In the following we have provided an overview of the most im-
portant technical data of the VIBROPORT 80, divided into ca-
tegories.
Units
• Acceleration (g, m/s
2
, BCUp, ECUp)
• Velocity (mm/s, in/s)
• Displacement (mm, mils)
• Volt/mV
• Single or double integration (double)
• Units interchangeable (metric/imperial)
Speed / process values.
•rpm, Hz
• Nm, A, kW, m
3
/s, MP, bar, °C, F, N, m, mm, mil, in, V
(Volts), EU
Note!
You can download a detailed description of the technical data
as a PDF document from our website www.bkvibro.com.
Note!
Volts are always used as input value on principle. The
readable values are not directly measured, but are recalcu-
lated internally. The sensor sensitivity (e.g.: mV[°C]) must
always be taken into account during measurement.
To Next Page
Loading...
