BRUEL & KJAER VIBROPORT 80 - 6.1.4 Battery

Translation of the Original Operating Instructions
VP-80/VP-80 E
30
Alphanumeric keypad
The alphanumeric keypad is used for entering letters and
numbers.
• Letters
To enter letters, quickly press repeatedly on the key that re-
presents the relevant letter.
•Numbers
To enter numbers, press the relevant number key.
6.1.2 Connection plate
The connection plate of the VIBROPORT 80 contains four
connections (sockets) for connecting sensors, power supply
modules and USB devices.
i
Note!
If several identical numbers are entered in succession, you
must wait briefly between entries. Otherwise letters will be
entered.
i
Note!
In addition to the cables and sensors available from Brüel &
Kjær Vibro GmbH, cables and sensors from other suppliers
can also be connected. The operating authority is responsible
for cables, sensors and accessories that are not supplied by
Brüel & Kjær Vibro GmbH. Brüel & Kjær Vibro GmbH cannot
accept any liability for products purchased from other manu-
facturers.