Translation of the Original Operating Instructions
VP-80/VP-80 E
37
6.1.4 Battery
Charging time
The battery charging time is generally three to four hours.
If the battery is completely discharged, you must charge the
device for at least an hour before you can operate the VP-80
again.
The device can be charged in two ways:
• via the docking station or
• via the power supply module.
Note!
Only the rechargeable battery / storage battery BP-15 (AC-
7003) may be fitted and used in the VIBROPORT 80.
Only the rechargeable battery / storage battery BP-15-CC
(AC-7004) may be fitted and used in the VIBROPORT 80 E.
Note!
The battery connections must not be short-circuited! This will
cause damage to the battery / the VIBROPORT 80.
To Next Page
Loading...
