BRUEL & KJAER VIBROPORT 80 - 6.2 Connecting the VIBROPORT 80 to the PC

Translation of the Original Operating Instructions
VP-80/VP-80 E
38
6.1.4.1 Charging the battery via the docking station
Fig. 5 Power supply
 Connect the power supply module to the docking station.
 Insert the power supply module into a socket.
 Insert the VIBROPORT 80 into the docking station.
 The red charging indicator light indicates that the battery is
charging.
 The battery is charged when the red charging indicator light
goes out.
WARNING!
Explosive atmosphere!
Do not use the docking station and power supply module in
potentially explosive atmospheres.
This can cause explosions, resulting in damage to property
and injuries.
• Never use the docking station and power supply module in
potentially explosive atmospheres.
i
Note!
Make sure that the VIBROPORT 80 is correctly positioned in
the docking station charging cradle, as otherwise the battery
will not be charged correctly. Note the indicator light display
(LEDs)!