Translation of the Original Operating Instructions
VP-80/VP-80 E
47
• Microsoft Windows Mobile Device Center (free down-
load) / Microsoft Windows 7 (32 / 64 bit)
• This software serves as synchronization software for
devices like the VIBROPORT 80, which are based on
Microsoft Windows Mobile. It may be necessary to
download Microsoft Windows Updates during installa-
tion.
• This tool can be downloaded free of charge if it is not
already installed. Under Microsoft Windows 7, the
Mobile Device Center corresponds to Tool Active Sync
under Microsoft Windows XP.
• CMC USB driver
• This driver is required for communication with the
VIBROPORT 80. Install it manually using the supplied
CD and execute the installed program after installation.
6.2.3 Report & EXaminer Software
This is a high-performance Report & EXaminer software pro-
gram with report and analysis functions for the Microsoft Win-
dows operating system (IBM PC-compatible). This completes
the service package for the VP-80.
The standard version is already contained in the two starter
packages, Analyzer Select and Balancer Select.
Reports can be generated quickly and easily with the Report
& EXaminer software from measurements stored in the
measuring instrument.
The VIBROPORT 80 is connected to the PC by means of a
USB interface.
The optional premium version enables you to analyze previ-
ously stored time signal data sets (.wav files) so they can be
post-processed for calculating FFT and waterfall spectra. For
the analysis of rolling-element bearing defects, Report & EXa-
Note!
Microsoft Windows may require a .net Framework 3.5 instal-
lation or higher, if this has not yet been installed on your PC.
To Next Page
Loading...
