Translation of the Original Operating Instructions
VP-80/VP-80 E
52
6.3 Reset function
If the VP-80 does not operate correctly, it can be reset with
the aid of the reset functions.
6.3.1 Performing a warm start
A warm start of the VP-80 is a software reset. This ends the
current processes and restarts the device. All settings are re-
tained.
Press and hold down the function keys 2, 7, 8, 9 simultane-
ously for two to three seconds.
The VIBROPORT 80 restarts.
6.3.2 Performing a cold start
A cold start of the VP-80 resets the device to delivery status.
WARNING!
Explosive atmosphere!
The housing must be open when performing a cold start.
This can cause explosions, resulting in damage to property
and injuries.
• Do not do this in a potentially explosive atmosphere.
Note!
During a cold start only the date, time and time zone are reset
to default values.
Firmware states and measuring data are retained.
To Next Page
Loading...
