Translation of the Original Operating Instructions
VP-80/VP-80 E
57
7.3 Main mask
The main mask appears when the VIBROPORT 80 is swit-
ched on. You can access all of your modules from here.
Fig. 11 Main mask
Cursor keys
The desired module is selected by pressing the cursor keys
(left, right, top, bottom).
Input keys (fire keys)
The selected module is started by pressing one of the three
input keys (fire keys).
Note!
Only some of the displayed modules can be installed, depen-
ding on the licensed features of your VP-80.
To Next Page
Loading...
