Translation of the Original Operating Instructions
VP-80/VP-80 E
58
Help, System Setup and Information (INFO)
You can use the softkeys
HELP, SYSTEM SETUP (the general system setup) and
INFO at the bottom of the screen to call up basic information
on the VIBROPORT 80.
7.4 Licensing
You can retrospectively purchase and install modules on your
VP-80. Modules which are not yet installed have a gray back-
ground.
In the initial mask, go to the module that you wish to install.
Press one of the three fire keys.
An input window opens
Enter the license number provided by B&K Vibro.
Confirm the input with OK.
Note!
The following module descriptions refer to the complete,
licensed functionality.
To Next Page
Loading...
