Translation of the Original Operating Instructions
VP-80/VP-80 E
59
7.5 Module overview
Picto-
gram
Description of the module
Overalls
The Overalls Module allows you to analyze
the overall condition of a machine and com-
pare it to the limit values according to DIN
ISO 10816 or the manufacturer’s data and
empirical values, for example. A single overall
can provide information on the overall condi-
tion of a machine, enabling a basic condition
assessment to be carried out easily and effici-
ently. In addition to the vibration overalls, ove-
ralls for assessing the rolling-element bearing
condition (BCUp, ECUp) can also be recor-
ded and evaluated.
Up to four measuring channels plus speed
are available. Each measuring channel has
two digital signal processing paths A and B.
Several measurements can thus be perfor-
med in parallel.
In addition, the Overalls Module supports
measurement and recording of overalls as a
function of speed f(n) or as a function of time
f(t).
To Next Page
Loading...
