Translation of the Original Operating Instructions
VP-80/VP-80 E
64
System Setup
In the System Setup you can define the most
important global system parameters of the
VIBROPORT 80, such as the system of units
or the time, for example.
Sensor Setup
In the Sensor Setup you can look at the set-
tings for the sensors predefined in the measu-
ring modules (Brüel & Kjaer Vibro sensors).
You can also select or define sensors for the
entire system here. These are then available
to you in all setups within the modules with
the specifications which you have defined.
This permits the integration and efficient use
of sensors from other manufacturers.
Picto-
gram
Description of the module
To Next Page
Loading...
