Translation of the Original Operating Instructions
VP-80/VP-80 E
73
7.6.6 Level 4 / Measurements mask
This is the level in which the actual measurements are perfor-
med. Although this can be accessed directly from the second
level (START softkey on a blue icon), it is normally only ac-
cessed from the third level (setup).
AVERAGE
Executing the AVERAGE softkey averages the current / ac-
quired values of the measurement (average value formation).
The softkey is displayed with a gray background.
When the softkey is activated again the values are displayed
unaveraged once more, and the AVERAGE softkey is dis-
played without a gray background.
VIEW
Activating this softkey opens a mask for setting the display /
representation of the measurement.
Which display / representation can be selected depends on
the measurement. Some setting examples are shown below
for the OVERALLS module:
• Numeric display options
• Only table [A+B]
• A+B+bar chart
• Table [A] CH 1 + CH 2
• A + bar chart (CH 1)
• A + bar chart (CH 2)
• Y-axis display
•Linear
• Logarithmic
Note!
As which function keys and softkeys are available depends
on the respective measuring module, the most important soft-
keys and their function are explained briefly below by way of
an example.
To Next Page
Loading...
