Translation of the Original Operating Instructions
VP-80/VP-80 E
83
Time zone
Define the time zone used by the device here. All time zones
are stored here - simply select the right one.
Date/Time
Here you can set the date and time according to the date for-
mat for each input field. These are then displayed in the hea-
der line.
Memory Options
This setting allows you to format data carriers by means of a
command and thus correct all data on the storage card or in
the internal memory (depending on the setting made under
the Memory parameter).
Keybd Backlight
Here you can activate (On) and deactivate (Off) the backligh-
ting of the cursor keys.
Language
Here you can define the language used in all modules of the
device. All available languages can be selected from a list.
7.8.2 Sensor Setup
The settings for the sensors are made in the Sensor Setup.
You can select or define sensors for the entire system; these
will be available in the modules according to the specification
which you have defined.
Note!
The Brüel & Kjær Vibro GmbH sensors are already contained
in the Sensor Setup database. Additional sensors from other
manufacturers can be added here.
To Next Page
Loading...
