Translation of the Original Operating Instructions
VP-80/VP-80 E
88
Predefined measurements
Here you can start the measurements (measuring tasks) pre-
defined by Brüel & Kjær Vibro GmbH. The predefined measu-
rements reflect frequently occurring, typical and important
measuring tasks in condition monitoring. The settings for the
respective measurement are already predefined and cannot
be deleted by the user. However, the settings of the predefi-
ned setups can be adapted for an individual measurement.
When a predefined measurement is next called up, it is reset
to the default setting.
Alternatively, it is possible to save self-defined setups as a file
and load them with the Report function.
You cannot create new (self) predefined measurements.
New measurement
You can define a new setup for a measurement by selecting
New measurement and pressing the fire key. When the Setup
has been edited, the new measurement is started with the
START softkey or the fire key.
Report
You can call up the Report mask with the REPORT softkey or
the fire key (the REPORT icon must be selected /highlighted).
In the Report mask you can back up (BACKUP), delete (DE-
LETE) or open and execute (OPEN) the saved setups and
measurements.
Fig. 16 Setup of the last measurement
To Next Page
Loading...
