Safety Guidelines
DOC-M88-EXX268_V1_12.2016 15
1.3 Correct and Intended Usage
The device and its components may only be used for the applications described in the cat-
alogue or the technical description. It may only be used in conjunction with devices or
components from other manufacturers which have been approved or recommended by
Bruker AXS.
NOTICE
Correct function of the instrument
The instrument can only function correctly and safely if it is transported, stored, setup,
and installed correctly, and if it is operated and maintained as recommended by Bruker
AXS and the manufacturer of the temperature chamber.
Intended use also includes compliance with all specifications within this manual. Any use
which exceeds or differs from the intended use shall be considered improper use. No
claims of any kind for damage will be entertained if such claims result from improper use.
1.4 Disclaimer and Liability
We have checked the contents of this manual for agreement with the hardware, Instru-
ment Control Software and software described. Since deviations cannot be precluded en-
tirely, we cannot guarantee full agreement. However, the data in this manual are reviewed
regularly and any necessary corrections included in subsequent editions. Suggestions for
improvements are welcome.
1.5 General Safety Precautions
Inside the temperature chamber temperatures from –190°C to 2300°C can occur which
are however not accessible from the outside. Do not touch the sample holder or internal
shieldings before ambient conditions are reached.
To Next Page
Loading...
