Bruker Anton Paar - Temperature Controllers for Anton Paar Chambers

Installation and Operation of the HTK-Series, TTK 600, XRK 900, and HPC 900 Chambers
DOC-M88-EXX268_V1_12.2016 53
6.3 Temperature Controllers for Anton Paar Chambers
Anton Paar supplies two temperature controller versions: the TCU series with built-in Eu-
rotherm 2604 controller and the new CCU series. Both versions can be mounted into the
D8 cabinet in the same way. Steps for doing this are given in chapter Mounting the Tem-
perature Controller into the D8 Enclosure [}47]. The steps for the software integration of
both controllers are the same. Instructions for this are given in chapter HTK-series, TTK
600, XRK 900, and HPC 900 Chambers [}100].
Figure6.5: TCU series controller with built-in Eurotherm 2604 controller
Figure6.6: CCU series controller