Installation and Operation of the CHC plus Humidity Chamber
60 DOC-M88-EXX268_V1_12.2016
Figure7.1: CHC plus chamber fully mounted on vertical diffractometer
1 Humidification head 2 Humidity sensor
7.3 Temperature Controllers and Water Circuit for CHC plus
Anton Paar supplies two temperature controller versions: the TCU series with built-in Eu-
rotherm 2604 controller and the new CCU series. Both versions, as well as the humidity
controller (Figure 7.4) can be mounted into the D8 enclosure in the same way or in a sep-
arate rack (close to the diffractometer on the back right side) powered by the diffractome-
To Next Page
Loading...
