Bruker Anton Paar - Figure 7.2: Front View of TCU110; Figure 7.3: Front View of a CCU100 Controller; Figure 7.4: Front View of MHG Controller

Installation and Operation of the CHC plus Humidity Chamber
DOC-M88-EXX268_V1_12.2016 61
ter supply line voltage. Steps for doing this are given in section Connecting the MHG for
CHC plus [}65]. The steps for the software integration of the controllers are given in sec-
tion CHC plus [}107] of the Appendix.
The Julabo water circuit must always stand outside the diffractometer enclosure close to
the diffractometer on the back right side.
Figure7.2: Front view of TCU110
Figure7.3: Front view of a CCU100 Controller
Figure7.4: Front view of MHG controller