Installation and Operation of the CHC plus Humidity Chamber
68 DOC-M88-EXX268_V1_12.2016
Figure7.13: RS232 connections from UIOB to Julabo Heating Circulator and water connections
1 to RS232-I | UIOB X2 4 to relay box
2 Water bath inlet from CHC plus 5 Water bath outlet to CHC plus
3 Water bath outlet (to drain) 6 Water bath inlet (from tap)
The Julabo controller configuration was set to ‘remote’ at Bruker AXS to allow operation
by the DIFFRAC.Measurement software, no further changes are required.