Bruker Anton Paar - Temperature Controllers DC S350 and DHS 1100

Installation and Operation of the DCS 350 and DHS 1100 Chambers
DOC-M88-EXX268_V1_12.2016 75
Figure8.2: Fixing the DHS 1100 onto the sample stage
For detailed instructions on connecting the chamber to the controller, cooling water, com-
pressed air cooling, vacuum/gas, and/or liquid nitrogen cooling, we refer to the Anton Paar
Manual supplied with the chamber.
8.3 Temperature Controllers DC S350 and DHS 1100
The DCS 350 and DHS 1100 are controlled by TCU series controllers (TCU 100 and TCU
200, respectively, TCU 100 shown in Figure 8.3) with built-in Eurotherm 2604 controller or
by a CCU100 controller (Figure 8.4).