EasyManua.ls Logo

BRUKSBO CDM1173 - Safety Instructions; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
ENG
CORDLESS LI-ION DRILL 20V
CDM1173
Thank you for choosing to purchase a product
from Rusta!
1. SAFETY INSTRUCTIONS
Read the enclosed safety
warnings, the additional safety
warnings and the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury. Save
the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Risk of electric shock.
Variable electronic speed.
Rotation, left/right.
Do not expose to rain.
Indoor use only.
Class II (Charger).
Max temperature 45
0
C.
Switched-mode power supply.
Safety isolating transformer.
Do not throw the battery into fire.
Do not throw the battery into water.
Do not dispose of the product in
unsuitable containers.
Separate collection for Li-ion battery.
The product is in accordance with the
applicable safety standards in the
European directives.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Charger plugs must match the outlet.
Never modify the plug in any way.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.