7
ENG
Residual risks
Even when the power tool is used as prescribed
it is not possible to eliminate all residual risk
factors. The following hazards may arise in
connection with the power tool’s construction
and design:
a) Health defects resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some
circumstances interfere with active or
passive medical implants. To reduce the
risk of serious or fatal injury, we
recommend persons with medical
implants to consult their physician and
the medical implant manufacturer before
operating this power tool.
2. MACHINE INFORMATION
Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
Technical specifications
Model No CDM1173
Voltage 20V
Chuck capacity 0.8 - 10mm
Torque settings 17 + Drill mode
No load speed
Position 1: 0-350 /min
Position 2: 0-1300 /min
Weight 0.8 kg
Sound pressure level L
PA
70.3 dB(A), K=5dB(A)
Sound power level L
WA
81.3 dB(A), K=5dB(A)
Vibration 2.368 m/s
2
k=1.5m/s
2
Model No CDA1180
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CDA1183, CDA1182
Weight 0.3 kg
Model No CDA1183
Charger input 100-240V~ 50/60Hz Max 1A
Charger output 21.5 1.7A
Rechargeable battery pack 20V Li-ion 1.5Ah
Charging time 2.0Ah battery 90 minutes
Charging time 4.0Ah battery 120 minutes
Recomended batteries CDA1180, CDA1181
Weight 0.15 kg
Only use the following batteries of the LX system
20V battery platform. Using any other batteries
could cause serious injury or damage the charger.
CDA1180 20V, 2Ah Lithium-Ion (Included)
CDA1181 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1183 Charger adapter (Included)
CDA1182 Quick charger
The batteries of the LX system 20V battery
platform are interchangeable with all the Bruksbo
LX System 20V battery platform tools.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
•
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
pages 2 - 3.
Fig. A
1. Machine
2. Battery
3. Battery unlock button
To Next Page
Loading...