26
1. Carefully unpack the appliance and remove all packaging materials. Keep plastic bags
out of the reach of babies and children.
2. Clean the external surface of the appliance, with a soft dump cloth.
3. Clean all the detachable parts of the appliance (water tank lid, water tank, adapters,
drip grid, grip tray) with warm soapy water using a soft sponge.
Never immerse the appliance in water or any other liquid
Never place the appliance or any part of the appliance in a dishwasher or
disinfector machine.
Never use hard brushed, scouring pads, highly corrosive, abrasive or alcohol-
based cleaning agents.
Make sure all parts are completely dry before reassembling or storing the
appliance.
4. Place the appliance on a flat and dry surface.
5. Clean the appliances pipes by following the procedure described on the below
paragraph “Cleaning procedure of the inner hydraulic circuit”.
6. Make sure that all parts of the appliance are properly mounted before using the
appliance.
7. Unfold the cord completely and make sure that there is not any sign of damage before
using the appliance.
8. Before connecting the appliance to the supply mains, check that the voltage of the
appliance corresponds to that of the voltage mains in your home.
9. If you notice an odor coming out of the appliance during the first use, it is normal.
Before using for the first time or after long pauses the machine may be difficult to pump
water. Follow the following procedure using the pipe to fill water into the circuit manually
prior to turn on the machine for first refill.
To Next Page
Loading...