32
Coffee brewing with Dolce Gusto capsules
1. Make sure the appliance is not connected to the power supply.
2. Fill the water tank (4) with cold water without exceeding max level indicator and
make sure the water tank is installed properly.
3. Lift the lever (1) to release the adapter (5).
4. Pull out the adapter (5) to remove it from the
appliance.
5. Open the adapter’s lid (5).
6. Insert the Dolce Gusto capsule into the adapter (5).
7. Close the adapter’s lid (5).
8. Insert the adapter (5) in the adapter input on the
appliance.
9. Press down the lever (1) to secure the adapter (5).
10. Connect the appliance to the power supply.
11. Press On/Off button to turn on the appliance. The
indication lights of the functions buttons (On/Off - Short
Espresso - Lungo)(2) will start to blink for about 45 sec
indicating the appliance is heating up. After heating up
the indication lights will turn solid.
To Next Page
Loading...