Need help?Do you have a question about the Brunton ADC Summit and is the answer not in the manual?
General| Type | Altimeter, Barometer, Compass, Thermometer |
|---|---|
| Digital Compass Resolution | 1 degree |
| Thermometer Resolution | 0.1 degree |
| Backlight | Yes |
| Compass Features | Digital |
| Temperature Range | -20 to 60 °C |
| Clock | Yes |
| Water Resistance | Yes |
| Power Source | CR2032 battery |
| Barometer Range | 300 to 1100 hPa |
| Digital Compass Accuracy | ±3 degrees |
| Thermometer Accuracy | +/- 2 degrees Celsius |
Important safety information regarding the use and limitations of the ADC device.
Explains the function and operation of the MODE button for navigation and setting.
Details the function and operation of the SET button for selection and confirmation.
Describes the function and operation of the RESET button for resetting and scrolling.
Explains the function of the LIGHT button for activating the backlight.
Overview of the three displays in Current Time Mode: Weather, Altitude, and Barometer.
Details the Weather Forecast Display, showing symbols and day of week.
Explains the Altitude Display, showing altitude and indicator.
Describes the Barometer Display, showing pressure and indicator.
Procedure to enter the setting display for time and date.
Step-by-step guide for setting time, date, and format.
Explains the function and meaning of the five weather forecast symbols.
Details the meaning of each weather forecast symbol.
Describes the display elements of the Daily Alarm Mode.
How to toggle the daily alarm ON or OFF.
Details the sound and behavior of the daily alarm.
Procedure to enter the setting display for the daily alarm time.
Step-by-step guide for setting the daily alarm hour and minute.
Overview of the three time measurement periods in Chronograph Mode.
Details the display elements of the Chronograph Mode.
How to start, stop, and reset the chronograph.
Procedure for recording lap times during chronograph operation.
How to reset the chronograph to its initial state.
Steps to access and view recorded lap times.
Details the display elements when recalling lap times.
Information about setting and using the countdown timer.
Details the display elements of the Race Timer Mode.
Procedure to enter the setting display for the race timer.
Step-by-step guide for setting the target time for the race timer.
Instructions for starting, stopping, and using the countdown timer.
How to reset the race timer to its preset target time.
Describes the audible alerts provided by the race timer.
Overview of the ADC's data logging capabilities.
Procedure for manually logging sensor data.
Explanation of the propeller mechanism for measuring wind speed.
Instructions on preparing the propeller before and after use.
Steps to take to accurately measure wind speed.
Lists and describes the various functions within Wind Speed Mode.
Details the information shown on the Wind Speed display.
How to select different units for displaying wind speed.
Definition and purpose of the Beaufort Scale for wind conditions.
How the ADC displays the Beaufort Scale using bars.
How to freeze the fluctuating wind speed reading on the display.
Procedure to reset the recorded maximum wind speed value.
Alerts the user when the current wind speed exceeds a preset level.
Describes the audible signals and timing of the wind speed alarm.
Guide to setting the wind speed alarm and the average wind speed calculation period.
How the device utilizes its propeller for directional indication.
Steps to use the device for bearing and direction finding.
Lists and describes the various functions within Temperature Mode.
Details the information shown on the Temperature display.
How to select between Celsius and Fahrenheit for temperature readings.
Explanation of wind chill effect and how it's calculated.
Provides examples of wind chill temperature effects under different conditions.
Procedure to reset the recorded minimum wind chill temperature.
How to access and interpret the 24-hour temperature history graph.
Alerts the user when wind chill temperature drops below a preset level.
Details the audible signals and timing of the wind chill temperature alarm.
Procedure to enter the setting display for alarm and calibration.
Steps for setting wind chill alarm level and ON/OFF status.
Procedure to enter the calibration setting display.
Steps for adjusting the temperature offset value for calibration.
Lists and describes the various functions within Barometer Mode.
Details the information shown on the Barometer display.
How to select different units for displaying barometric pressure.
How to access and interpret the 24-hour pressure history graph.
Alerts the user to predicted stormy weather conditions.
Details the audible signals and timing of the storm alarm.
Procedure to enter the setting display for the storm alarm.
Steps for setting the storm alarm ON or OFF status.
Procedure to calibrate barometric pressure readings.
How to adjust pressure readings for sea-level reference.
Lists and describes the various functions within Altimeter Mode.
Important warning about altitude estimation and reliance.
Overview of the three displays in Altimeter Mode: Ski-Run, Max-Min, Air-Density.
Details the display for tracking ski runs, ascent, and descent.
Details the display for maximum and minimum altitude readings.
How to select between meters and feet for altitude readings.
Explains the ADC's functions for registering ski runs.
Procedure to enable or disable the ski run tracking function.
Procedure to reset ski run counts and altitude data.
Crucial note about the dependency of ascend/descend on ski-run activation.
Overview of the display showing current, min, and max altitude.
Explanation of how current altitude is measured.
Details on the record for the lowest altitude achieved.
Details on the record for the highest altitude achieved.
Procedure to reset the maximum and minimum altitude readings.
Alerts the user when the current altitude exceeds a preset level.
Details the audible signals and timing of the altitude alarm.
Functions available in Altimeter Setting Mode: Alarm and Calibration.
Procedure to enter the setting display for alarm and calibration.
Guide to setting the altitude alarm level and ON/OFF status.
Procedure to adjust the altitude offset value for calibration.
Overview of the ADC's data logging capabilities and data elements.
Describes the alternating displays for Data Log and Free Memory.
Procedure to enable/disable auto-log and set logging interval.
How newly logged data is added to the data list.
Procedure for deleting existing records from the data log.
Functions for managing data logs: delete, interval, PC sync.
Procedure to enter the Data Log Mode Setting display.
Steps to transfer logged data from the ADC to a PC.
Operations for reviewing logged data entries.
Procedure to scroll through and select a specific logged record.
How to view specific data points within a selected logged record.
Specifications related to the Current Time Mode.
Specifications related to the Wind Speed Mode.
Specifications related to the Temperature Mode.
Specifications related to the Barometer Mode.
Specifications related to the Altitude Mode.
Specifications related to the Data Log Mode.
Specifications related to the Daily Alarm Mode.
Specifications related to the Chronograph Mode.
Specifications related to the Race Timer Mode.
General specifications including backlight.
Accuracy, resolution, and units for wind speed measurements.
Accuracy, resolution, and units for temperature measurements.
Accuracy, resolution, and units for barometric pressure.
Accuracy, resolution, and units for altitude measurements.
Accuracy specification for timekeeping.
Details about the weather forecast symbols.
Details the terms and conditions of the product's two-year warranty.
Instructions and form for registering the product with the manufacturer.
To Next Page
