Maintenance
Maintenance Information
1. Lubrication of all moving parts is essential to the longevity and optimal performance of your Machine.
Initial lubrication of some parts of your gym has been done at the factory.
Note: Do not use oil based lubricants as they will attract dust, dirt and grime, and will eventually gum up
and erode bushings and sealed bearings.
2. All pulleys and bushings should be checked regularly for signs of wear.
3. Check and adjust cable tension periodically as
it will maintain proper anatomical function.
4. Periodically check all moving parts, upholstery and grips for signs of wear or damage. If there is a
problem or replacement part which is necessary, STOP USING THE EQUIPMENT and immediately
contact your local retailer. Replace parts using only genuine parts.
5. As needed, upholstery may be cleaned with a mild solution of soap and water. Regular use of a vinyl
treatment will add to the life and appearance of your uphol
stery.
6. All chrome plated surfaces should be cleaned regularly to prolong the life and luster of the finish.
Wipe machine down with a damp cloth and dry thoroughly each day. At least once a week your
chrome equipment should be polished with a commercial grade or automotive type chrome polish.
7. When checking the bolts and nuts, be sure they are all fully fastened. If there is a bolt or nut that
continuously loosens obtain a replacement through your local r
etailer.
8. Check welds to be free of cracks.
9. Failure to perform routine maintenance could result in personal injury and/or equipment damage.
AUSTRALIA
WWW.RENOUFFITNESS.COM.AU
To Previous Page
Loading...
