52
A150192
S The control will inform you if the connection is successful. If so, touch
DONE.
d If the connection is unsuccessful, verify that the proper information
has been entered before you touch RETRY. The control will go
through the process again.
A12118
S After your control has connected to the network, go to
www.MyEvolutionConnex.Bryant.com
to register the unit and begin
remote access. This requires the MAC address and serial number of the
EvolutionR Connext Wall Control, NOT the Wireless Access Point. To
find the serial number and MAC address of the Evolution Connex Wall
Control, click on Menu, Down Arrow, Wireless and View My Evolu-
To Next Page
Loading...
Need help?
General
