Brymen EEVblog BM235 - Electrical Specs: AutoV DCV, Ohm, Continuity, Capacitance; AutoV DC Voltage Accuracy; Resistance Measurement Accuracy; Continuity Tester Specs

AutoV_DCV (Model 235 only)
RANGE Accuracy
1)
600.0V, 1000V 2.0% + 3d
1)
Not specified at <1VDC
Threshold: > +1.0VDC or < -1.0VDC nominal
Input Impedance:
Initially approx. 2.1k, 164pF nominal; Impedance increases abruptly within a
fraction of a second as display voltage is above 50V (typical). Ended up impedances
vs display voltages typically are:
12k @100V
100k @300V
240k @600V
580k @1000V
Ohm
RANGE
1)
Accuracy
600.0, 6.000k
0.3% + 3d
60.00k, 600.0k
0.5% + 3d
6.000M
2)
, 60.00M
3)
0.9% + 2d
4)
1)
Open Circuit Voltage: 1.6VDC typical
2)
Constant Test Current: 0.2A Typical
3)
Constant Test Current: 0.02A Typical
4)
5%+20d @ >30M
BeepLit™ Continuity Tester
Continuity Threshold: Between 30 and 480
Continuity ON Response Time: <15ms
Audible Indication: Beep sound
Visible Indication: LCD Backlight
Capacitance (Models 233 & 235 only)
RANGE Accuracy
20.00nF, 200.0nF 1.5% + 8d
2000nF, 20.00F, 200.0F, 2000F
1.5% + 2d
10.00mF 4.5% + 10d
Accuracies with film capacitor or better
22