BSD-1200 Series
1. Also in reverse rotation, the clutch is turned off in such manner as in normal rotation,
stopping the motor running. Accordingly, when the screw tightened at a large torque,
set it to a higher torque scale.
2. The number from zero to eight on the Torque Scale are reference number only and not
an indication of actual torque output.
1. BIT Type ： No. 00 ．．．．Bit use in dia 1.3~1.8mm screw
No. 0．．．．．Bit use in dia 1.6~2.0mm screw
No. 1．．．．．Bit use in dia 2.0~2.6mm screw
No. 2．．．．．Bit use in dia 3.0~4.0mm screw
BSD-1000 with BIT 1# & 2# 1 Pce. Each
BSD-1200 with BIT 1# & 2# 1 Pce. Each
2. Suspension rack and Torque fixing ring acceptable for use with the tool are available from
KILEWS catalogue.
6. Accessories
CAUTION
To Next Page
Loading...