Troubleshooting
CD or MP3-CD does not play
(1) Check that you are in CD mode. If you are not yet in
CD mode, press the Power button to select the function status,
then press the Mode button to select CD mode.
(2) When the unit is in CD mode, you can see the total number
of the tracks, press the PLAY/PAUSE button to play the CD disc.
(3) Take out the CD and check that it is not marked or
grated. Damaged CDs may not play in the CD boombox or may skip
or not spin properly in the CD compartment.
(4) Check that you are using an original audio CD.
and not a copy. Often, ripped CDs do not play.
The mode buttons do not respond.
(1)Check that the wall outlet is turned on.
(2) Check that the power cord plug is
inserted into the AC socket of the unit completely.
(3) Check that you are trying to use the function buttons for the mode you
are in.
(4) If you are using batteries, they may be dead and
Needs to be replaced.
(5) If you are using the mains, unplug the mains plug from the mains.
Leave the boombox for 3 minutes and then plug the power back in.
- 14 -
To Next Page
Loading...