Need help?Do you have a question about the BST ACTIV 216 and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz |
|---|---|
| Signal to Noise Ratio | >90dB |
| Weight | 1.2kg |
| Type | Analog |
| EQ | 2-band |
Input for DJ microphone or voice-over microphone using XLR connector.
Reduces music volume when DJ microphone is active.
Adjusts low, medium, and high frequencies for DJ signal.
Slide control for adjusting DJ output signal level.
Selects between LINES STEREO and PHONO input signals.
Adjusts frequency response (high, mid, low) for input signals.
Adjusts input signal level for harmonization.
Slide controls for individual channel volume adjustment.
Linear slide for mixing between two main input ways.
Assigns input ways to crossfader sides A or B.
Turns the mixer ON or OFF. Ensure controls are at minimum position.
LED indicators for left and right Master output levels.
Stereo input jack for headphones (Ø 6.35mm).
Adjusts the stereo headphone output level.
Selects audio source to listen to in headphones.
Adjusts the level of the Master output (X or Y).
Asymmetrical RCA connectors for amplifier link.
Connects ground to turntables.
Connects sources like CD/LINE, PHONO, and microphones.
Connects the AC power cord. Ensure 220/240 V AC.
Stereo outputs for connecting tape recorders or computers.
Protects mixer from anomalies; check if unit does not power on.
Details sensitivity for MICRO, PHONO, and CD/LINE inputs.
Specifies nominal and maximum levels for MASTER and RECORD outputs.
Specifies harmonic distortion percentage at nominal output.
Details frequency response range for different inputs.
Specifies Signal-to-Noise ratio for MICRO, PHONO, and CD/LINE.
Specifies maximum output power for headphones.
Details attenuation level for the Voice Over function.
Provides physical dimensions and weight of the mixer.
1-year warranty on parts/labor, 90 days for crossfaders.
Rules apply from factory exit; invoice date is warranty start.
Defective equipment must be sent pre-paid; service by approved technicians.
Potentiometers have limited life and are not covered for intensive use.
To Next Page
